Drill Press
Manhattan MSC 951230

General Information:
A motorized tool designed to bore holes in wood, metal or plastic. We keep a range of drill bits in one of the main drawers, underneath the handheld power tools.
Safety Basics:
The Drill Press saw can be very dangerous if used incorrectly. All of the following MUST be done while operating the saw:
Personal Safety:
Wear safety glasses at all times
Tie back hair, remove any loose or dangling jewellery, make sure sleeves are rolled up
Environmental Safety:
Turn on ventilation before operation
Sweep up any excess sawdust after operation
Operational Safety:
Have a trained AMS mentor present with you in the wood room
Securely clamp your material - make sure you cannot shift it
Turn off drill press if making adjustments or cleaning
Tighten the drillbit in the chuck before using
How to Use:
Clamp material down securely
Turn on the drill light if necessary
Turn on the Drill press, pull down the quill handle
Pull the drill back up once the hole has been created. Ensure to put scrap wood underneath material if hoping to create a through-hole
Turn off the drill press
Clean the surface of saw dust with the shop vac
Model Type: Manhattan Drill Press MSC 951230
Specifications:


Last updated
Was this helpful?